Splash Dr.
Menu
Overnight chlorine drop test

How do I know if I have algae in my swimming pool?

Clear water does not always mean no algae. If you are constantly adding chlorine, raising your salt cell percentage, or constantly adding chlorine tablets, you may have an algae problem. Our technicians test for it overnight.

  1. NightWe test your chlorine level at night to get a baseline amount.
  2. OvernightWe then cover the pool and let it sit overnight.
  3. MorningWe test again first thing in the morning. A drop of more than 1ppm typically indicates algae present and a shock treatment is necessary.

Standard pool chemical levels.

Your chlorine level is determined by whether you use a salt water generator or liquid chlorine, and by your cyanuric acid level. The higher the stabilizer level, the higher your maintenance chlorine level must be.

pH

6.87.27.57.88.2
7.2–7.8 · ideal 7.5

Chlorine

041115 ppm
4–11 ppm · depends on CYA

CYA

050100150 ppm
50–100 ppm · salt systems vary

Alkalinity

50100150200250 ppm
100–150 ppm

Calcium hardness

0250650800 ppm
250–650 ppm

Calcium hardness is a problem for pool owners in St. George, Utah. Give us a call for a free consultation and water evaluation.

Common pool problems

Wind, sand, calcium and algae.

Brown algae spots in a swimming pool in Hurricane, Utah
Algae problem in Hurricane, Utah
Sand and dirt in a pool in St. George, Utah
Keeping a pool clean in St. George is challenging due to the constant wind and sand
Splash Doctor pool in Hurricane, from green to clean
Hurricane, from green to clean (Splash Doctor’s own photo)

For all of our shock treatments, we test and add chlorine every morning, afternoon, and evening until it passes an overnight chlorine test successfully.

Calcium hardness is a problem for pool owners in St. George, Utah. Give us a call to get a free consultation and water evaluation.

Service & pricing

What does pool service include?

Our pool service includes water testing, chemical balancing, brushing, skimming, skimmer and pump basket cleaning, and equipment and plumbing inspection.

What areas do you offer pool service?

Hurricane, St. George, Washington, Springdale, Santa Clara, Bloomington, Toquerville, La Verkin, Rockville, and everywhere in between.

How much does pool service cost per month?

Our weekly pool service ranges from $100–175 plus chemicals based on your swimming pool size, equipment, location, and pool type. We also offer biweekly or monthly pool service.

Do you offer spa service?

We offer stand alone spa service as well as pool service and maintenance. We can take care of your spa weekly, and we also offer quarterly service to drain, clean, and refill your above ground spa.

Water & equipment

Why does my pool seem to never have chlorine in it?

If you are constantly adding chlorine, raising your salt cell percentage, or constantly adding chlorine tablets you may have an algae problem. Contact us so we can test your water to confirm.

How do I treat cloudy swimming pool water?

Cloudy water is treated in a similar way to algae. Use of clarifiers and other such products typically masks an underlying condition so it is to be avoided.

How often should I clean my cartridge filters?

We require all pools under our service contracts to be cleaned at a minimum of once per quarter. This ensures water flows at its intended rate and does not put undue stress on components.

How often should a salt cell be cleaned?

We clean all salt cells on our routes at a minimum of once per quarter. If you have a pool automation system, it will typically advise cleaning after a certain number of hours in use.

When should I replace the seals on my pool pump?

We recommend changing your pool pump seals before they start leaking. Typically every 5 years is sufficient if you maintain your water chemistry correctly.

What pool vacuum system do you recommend?

A robotic electric pool vacuum. It keeps the dirt, dust, debris, and garbage contained in the vacuum itself rather than running it through your plumbing, pumps and filters, does not require the pump to be running, and cleans your waterline tile.

What RPM should I set my variable speed pump to?

A variable speed pump can save an enormous amount of electricity. We calculate pump run times from flow rate, pool size, and amount of typical use and dirt to arrive at a good starting point. Call us for a pool water evaluation and consultation.

What should my pool’s chlorine level be?

It depends on whether you use a salt water generator or liquid chlorine, and on your cyanuric acid level. The higher the stabilizer level, the higher your maintenance chlorine level must be.

Call Splash Doctor · 435-225-7948